CST/berger LM30 series Rotary Laser. Level & Plumb walls. Easy visible laser "chalk Line". Tripod included in rental. Uses 4 "C" batteries, approx 60hr of intermittent use.

60" Rat Tail Pry Bar

Used to loosen and breakup soil.

Bostitch RN46 Roof Nailer. Coiled style, 3/4"- 1-3/4", 15 degree nails used.  Operating pressure is between 70-120 PSI.  

Senco FramePro 701XP Frame Nailer. Uses clipped head 2"-3-1/2" nails.  Operating pressure is between 70-120 PSI, requires 10CFM.  

Mallet activated floor nailer, operates between 70-90PSI.  Uses 1.5"-2" floor cleats.  2" available at rental.  

Senco FinshPro 41XP finish nailer. Uses 15 ga., 34 degree 1-1/4"- 2-1/2" nails.  Operating pressure is between 70-120PSI, requires 4 CFM.  

Senco SLP20 Brad nailer. Uses 18 ga. 5/8"- 1-5/8" sizes.  Operating pressure is between 70-120PSI and requires 2CFM.  

24" Nail Sweeper. Use to clean up roofing nails after tear off, or spill.

48" Level

10 LB Fiberglass Handled sledge hammer

Bostitch PC2K Power Slam. Great for putting down roofing paper and other sheet products. Uses STCR5019 1/4", 3/8", 1/2" staples.

Power actuated load gun to fasten into concrete or other hard surfaces. The Model DX36M features semi-automatic cartridge advance and piston return. Ideal for fastening 2 x 4s to concrete and steel. Loads in strips of 10 that advance automatically when tool is cycled. Fasteners range from 1/2"- 2-7/8". Different strength loads available. Firing strips available for sale.  WEAR EYE PROTECTION!

Powerful hammer drill that can be used as a breaker, or chisel. Uses SDS style bits and chisels - Provided

1/2" electric hammer drill. Uses SDS bits

1/2" Electric drill. Angle can point in different directions to get into many hard to get to areas.

Wiss HC-5 , 5 blade hand sheet metal crimper

Cable crimper for fastening cable ferrules and stops on aircraft cable.

Wacker EH 27/115 electric breaking hammer. 38 lb hit, comes with transport stand and bits. 115V 15A.

Hilti TE 905-AVR Hand Held Breaker/Chisel.  Can produce up to 2200 blows per minute. Comes with bits. 115V

Van Mark aluminum trim cutter. Cut aluminum coil stock with precision.  To be used with the 10' aluminum break.  

Van Mark 10' Aluminum Brake

30" H.D. Contractor Grade.  Not For Committing Crime!